1211 lines
56 KiB
INI
1211 lines
56 KiB
INI
# Print profiles for the Creality printers.
|
|
|
|
[vendor]
|
|
# Vendor name will be shown by the Config Wizard.
|
|
name = Creality
|
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
|
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
|
config_version = 0.1.3
|
|
# Where to get the updates from?
|
|
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
|
|
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
|
|
|
# The printer models will be shown by the Configuration Wizard in this order,
|
|
# also the first model installed & the first nozzle installed will be activated after install.
|
|
# Printer model name will be shown by the installation wizard.
|
|
|
|
[printer_model:ENDER3]
|
|
name = Creality Ender-3
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender3_bed.stl
|
|
bed_texture = ender3.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER3BLTOUCH]
|
|
name = Creality Ender-3 BLTouch
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender3_bed.stl
|
|
bed_texture = ender3.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER3V2]
|
|
name = Creality Ender-3 V2
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender3v2_bed.stl
|
|
bed_texture = ender3v2.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER3S1]
|
|
name = Creality Ender-3 S1
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender3v2_bed.stl
|
|
bed_texture = ender3v2.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER3MAX]
|
|
name = Creality Ender-3 Max
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = cr10v2_bed.stl
|
|
bed_texture = cr10spro.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER4]
|
|
name = Creality Ender-4
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender3v2_bed.stl
|
|
bed_texture = ender3v2.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER5]
|
|
name = Creality Ender-5
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender3_bed.stl
|
|
bed_texture = ender3.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER5PLUS]
|
|
name = Creality Ender-5 Plus
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender5plus_bed.stl
|
|
bed_texture = ender5plus.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER6]
|
|
name = Creality Ender-6
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender6_bed.stl
|
|
bed_texture = ender6.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER7]
|
|
name = Creality Ender-7
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender7_bed.stl
|
|
bed_texture = ender7.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER2]
|
|
name = Creality Ender-2
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender2_bed.stl
|
|
bed_texture = ender2.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:ENDER2PRO]
|
|
name = Creality Ender-2 Pro
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = ENDER
|
|
bed_model = ender2pro_bed.stl
|
|
bed_texture = ender2pro.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR5PRO]
|
|
name = Creality CR-5 Pro
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr5pro_bed.stl
|
|
bed_texture = cr5pro.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR5PROH]
|
|
name = Creality CR-5 Pro H
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr5pro_bed.stl
|
|
bed_texture = cr5pro.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR6SE]
|
|
name = Creality CR-6 SE
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr6se_bed.stl
|
|
bed_texture = cr6se.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR6MAX]
|
|
name = Creality CR-6 Max
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10s4_bed.stl
|
|
bed_texture = cr10s4.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10SMART]
|
|
name = Creality CR-10 SMART
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10v2_bed.stl
|
|
bed_texture = cr10spro.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10MINI]
|
|
name = Creality CR-10 Mini
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10mini_bed.stl
|
|
bed_texture = cr10mini.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10MAX]
|
|
name = Creality CR-10 Max
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10max_bed.stl
|
|
bed_texture = cr10max.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10]
|
|
name = Creality CR-10
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10_bed.stl
|
|
bed_texture = cr10.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10V2]
|
|
name = Creality CR-10 V2
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10v2_bed.stl
|
|
bed_texture = cr10.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10V3]
|
|
name = Creality CR-10 V3
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10v2_bed.stl
|
|
bed_texture = cr10.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10S]
|
|
name = Creality CR-10 S
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10_bed.stl
|
|
bed_texture = cr10.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10SPRO]
|
|
name = Creality CR-10 S Pro
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10v2_bed.stl
|
|
bed_texture = cr10spro.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10SPROV2]
|
|
name = Creality CR-10 S Pro V2
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10v2_bed.stl
|
|
bed_texture = cr10.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10S4]
|
|
name = Creality CR-10 S4
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10s4_bed.stl
|
|
bed_texture = cr10s4.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR10S5]
|
|
name = Creality CR-10 S5
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr10s5_bed.stl
|
|
bed_texture = cr10s5.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR20]
|
|
name = Creality CR-20
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = ender3_bed.stl
|
|
bed_texture = cr20.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR20PRO]
|
|
name = Creality CR-20 Pro
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = ender3_bed.stl
|
|
bed_texture = cr20.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR200B]
|
|
name = Creality CR-200B
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr200b_bed.stl
|
|
bed_texture = cr200b.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:CR8]
|
|
name = Creality CR-8
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = CR
|
|
bed_model = cr8_bed.stl
|
|
bed_texture = cr8.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
#[printer_model:CRX]
|
|
#name = Creality CR-X
|
|
#variants = 0.4
|
|
#technology = FFF
|
|
#family = CR-X
|
|
#bed_model = cr10v2_bed.stl
|
|
#bed_texture = cr10spro.svg
|
|
#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
#[printer_model:CRXPRO]
|
|
#name = Creality CR-X Pro
|
|
#variants = 0.4
|
|
#technology = FFF
|
|
#family = CR-X
|
|
#bed_model = cr10v2_bed.stl
|
|
#bed_texture = cr10spro.svg
|
|
#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
[printer_model:SERMOOND1]
|
|
name = Creality Sermoon-D1
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = SERMOON
|
|
bed_model = sermoond1_bed.stl
|
|
bed_texture = sermoond1.svg
|
|
default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
|
|
|
|
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
|
# not make it into the user interface.
|
|
|
|
# Common print preset
|
|
[print:*common*]
|
|
avoid_crossing_perimeters = 0
|
|
bridge_acceleration = 250
|
|
bridge_angle = 0
|
|
bridge_flow_ratio = 0.95
|
|
bridge_speed = 25
|
|
brim_width = 0
|
|
clip_multipart_objects = 1
|
|
compatible_printers =
|
|
complete_objects = 0
|
|
default_acceleration = 500
|
|
dont_support_bridges = 1
|
|
elefant_foot_compensation = 0.1
|
|
ensure_vertical_shell_thickness = 1
|
|
external_fill_pattern = rectilinear
|
|
external_perimeters_first = 0
|
|
external_perimeter_extrusion_width = 0.45
|
|
external_perimeter_speed = 25
|
|
extra_perimeters = 0
|
|
extruder_clearance_height = 34
|
|
extruder_clearance_radius = 47
|
|
extrusion_width = 0.45
|
|
fill_angle = 45
|
|
fill_density = 15%
|
|
fill_pattern = grid
|
|
first_layer_extrusion_width = 0.42
|
|
first_layer_height = 0.2
|
|
first_layer_speed = 20
|
|
gap_fill_speed = 30
|
|
gcode_comments = 0
|
|
infill_every_layers = 1
|
|
infill_extruder = 1
|
|
infill_extrusion_width = 0.45
|
|
infill_first = 0
|
|
infill_only_where_needed = 0
|
|
infill_overlap = 25%
|
|
infill_speed = 50
|
|
interface_shells = 0
|
|
max_print_speed = 100
|
|
max_volumetric_extrusion_rate_slope_negative = 0
|
|
max_volumetric_extrusion_rate_slope_positive = 0
|
|
max_volumetric_speed = 0
|
|
min_skirt_length = 4
|
|
notes =
|
|
overhangs = 0
|
|
only_retract_when_crossing_perimeters = 0
|
|
ooze_prevention = 0
|
|
output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
|
|
perimeters = 2
|
|
perimeter_extruder = 1
|
|
perimeter_extrusion_width = 0.45
|
|
perimeter_speed = 40
|
|
post_process =
|
|
print_settings_id =
|
|
raft_layers = 0
|
|
resolution = 0
|
|
seam_position = nearest
|
|
single_extruder_multi_material_priming = 0
|
|
skirts = 1
|
|
skirt_distance = 3
|
|
skirt_height = 2
|
|
small_perimeter_speed = 25
|
|
solid_infill_below_area = 0
|
|
solid_infill_every_layers = 0
|
|
solid_infill_extruder = 1
|
|
solid_infill_extrusion_width = 0.45
|
|
solid_infill_speed = 40
|
|
spiral_vase = 0
|
|
standby_temperature_delta = -5
|
|
support_material = 0
|
|
support_material_extruder = 0
|
|
support_material_extrusion_width = 0.38
|
|
support_material_interface_extruder = 0
|
|
support_material_angle = 0
|
|
support_material_buildplate_only = 0
|
|
support_material_enforce_layers = 0
|
|
support_material_contact_distance = 0.15
|
|
support_material_interface_contact_loops = 0
|
|
support_material_interface_layers = 2
|
|
support_material_interface_spacing = 0.2
|
|
support_material_interface_speed = 100%
|
|
support_material_pattern = rectilinear
|
|
support_material_spacing = 2
|
|
support_material_speed = 40
|
|
support_material_synchronize_layers = 0
|
|
support_material_threshold = 40
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 60%
|
|
thin_walls = 0
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_infill_speed = 30
|
|
travel_speed = 150
|
|
wipe_tower = 0
|
|
wipe_tower_bridging = 10
|
|
wipe_tower_rotation_angle = 0
|
|
wipe_tower_width = 60
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 140
|
|
xy_size_compensation = 0
|
|
|
|
[print:*0.08mm*]
|
|
inherits = *common*
|
|
layer_height = 0.08
|
|
perimeters = 3
|
|
bottom_solid_layers = 9
|
|
top_solid_layers = 11
|
|
bridge_flow_ratio = 0.70
|
|
|
|
[print:*0.10mm*]
|
|
inherits = *common*
|
|
layer_height = 0.10
|
|
perimeters = 3
|
|
bottom_solid_layers = 7
|
|
top_solid_layers = 9
|
|
bridge_flow_ratio = 0.70
|
|
|
|
[print:*0.12mm*]
|
|
inherits = *common*
|
|
layer_height = 0.12
|
|
perimeters = 3
|
|
bottom_solid_layers = 6
|
|
top_solid_layers = 7
|
|
bridge_flow_ratio = 0.70
|
|
|
|
[print:*0.16mm*]
|
|
inherits = *common*
|
|
layer_height = 0.16
|
|
bottom_solid_layers = 5
|
|
top_solid_layers = 7
|
|
bridge_flow_ratio = 0.85
|
|
|
|
[print:*0.20mm*]
|
|
inherits = *common*
|
|
layer_height = 0.20
|
|
bottom_solid_layers = 4
|
|
top_solid_layers = 5
|
|
|
|
[print:*0.24mm*]
|
|
inherits = *common*
|
|
layer_height = 0.24
|
|
top_infill_extrusion_width = 0.45
|
|
bottom_solid_layers = 3
|
|
top_solid_layers = 4
|
|
|
|
[print:*0.28mm*]
|
|
inherits = *common*
|
|
layer_height = 0.28
|
|
top_infill_extrusion_width = 0.45
|
|
bottom_solid_layers = 3
|
|
top_solid_layers = 4
|
|
|
|
[print:0.08mm SUPERDETAIL @CREALITY]
|
|
inherits = *0.08mm*
|
|
compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.10mm HIGHDETAIL @CREALITY]
|
|
inherits = *0.10mm*
|
|
renamed_from = "0.10mm HIGHDETAIL @ENDER3"
|
|
compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.12mm DETAIL @CREALITY]
|
|
inherits = *0.12mm*
|
|
renamed_from = "0.12mm DETAIL @ENDER3"
|
|
compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.16mm OPTIMAL @CREALITY]
|
|
inherits = *0.16mm*
|
|
renamed_from = "0.15mm OPTIMAL @ENDER3"; "0.15mm OPTIMAL @CREALITY"
|
|
compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.20mm NORMAL @CREALITY]
|
|
inherits = *0.20mm*
|
|
renamed_from = "0.20mm NORMAL @ENDER3"
|
|
compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.24mm DRAFT @CREALITY]
|
|
inherits = *0.24mm*
|
|
renamed_from = "0.24mm DRAFT @ENDER3"
|
|
compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.28mm SUPERDRAFT @CREALITY]
|
|
inherits = *0.28mm*
|
|
compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
|
|
|
|
# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
|
|
# https://www.thingiverse.com/thing:2615842
|
|
# Pay particular attention to bridging, overhangs and retractions.
|
|
# Also print the following bed adhesion test at 0.1 layer height as well:
|
|
# https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
|
|
# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
|
|
# So having some leeway to get good bed adhesion is not a luxury for many users
|
|
|
|
[filament:*common*]
|
|
cooling = 0
|
|
compatible_printers =
|
|
extrusion_multiplier = 1
|
|
filament_cost = 0
|
|
filament_density = 0
|
|
filament_diameter = 1.75
|
|
filament_notes = ""
|
|
filament_settings_id = ""
|
|
filament_soluble = 0
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 20
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/
|
|
|
|
[filament:*PLA*]
|
|
inherits = *common*
|
|
bed_temperature = 60
|
|
fan_below_layer_time = 100
|
|
filament_colour = #DDDDDD
|
|
filament_max_volumetric_speed = 15
|
|
filament_type = PLA
|
|
filament_density = 1.24
|
|
filament_cost = 20
|
|
first_layer_bed_temperature = 60
|
|
first_layer_temperature = 210
|
|
fan_always_on = 1
|
|
cooling = 1
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
bridge_fan_speed = 100
|
|
disable_fan_first_layers = 1
|
|
temperature = 205
|
|
|
|
[filament:*PET*]
|
|
inherits = *common*
|
|
bed_temperature = 70
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
fan_below_layer_time = 20
|
|
filament_colour = #DDDDDD
|
|
filament_max_volumetric_speed = 8
|
|
filament_type = PETG
|
|
filament_density = 1.27
|
|
filament_cost = 30
|
|
first_layer_bed_temperature = 70
|
|
first_layer_temperature = 240
|
|
fan_always_on = 1
|
|
max_fan_speed = 50
|
|
min_fan_speed = 20
|
|
bridge_fan_speed = 100
|
|
temperature = 240
|
|
|
|
[filament:*ABS*]
|
|
inherits = *common*
|
|
bed_temperature = 100
|
|
cooling = 0
|
|
disable_fan_first_layers = 3
|
|
fan_below_layer_time = 20
|
|
filament_colour = #DDDDDD
|
|
filament_max_volumetric_speed = 11
|
|
filament_type = ABS
|
|
filament_density = 1.04
|
|
filament_cost = 20
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 245
|
|
fan_always_on = 0
|
|
max_fan_speed = 0
|
|
min_fan_speed = 0
|
|
bridge_fan_speed = 30
|
|
top_fan_speed = 0
|
|
temperature = 245
|
|
|
|
[filament:Generic PLA @CREALITY]
|
|
inherits = *PLA*
|
|
renamed_from = "Generic PLA @ENDER3"
|
|
filament_vendor = Generic
|
|
|
|
[filament:Generic PETG @CREALITY]
|
|
inherits = *PET*
|
|
renamed_from = "Generic PETG @ENDER3"
|
|
filament_vendor = Generic
|
|
|
|
[filament:Generic ABS @CREALITY]
|
|
inherits = *ABS*
|
|
renamed_from = "Generic ABS @ENDER3"
|
|
first_layer_bed_temperature = 90
|
|
bed_temperature = 90
|
|
filament_vendor = Generic
|
|
|
|
[filament:Creality PLA @CREALITY]
|
|
inherits = *PLA*
|
|
renamed_from = "Creality PLA @ENDER3"
|
|
filament_vendor = Creality
|
|
temperature = 200
|
|
bed_temperature = 60
|
|
first_layer_temperature = 205
|
|
first_layer_bed_temperature = 60
|
|
filament_colour = #42BDD8
|
|
|
|
[filament:Creality PETG @CREALITY]
|
|
inherits = *PET*
|
|
renamed_from = "Creality PETG @ENDER3"
|
|
filament_vendor = Creality
|
|
temperature = 240
|
|
bed_temperature = 70
|
|
first_layer_temperature = 240
|
|
first_layer_bed_temperature = 70
|
|
max_fan_speed = 40
|
|
min_fan_speed = 20
|
|
filament_colour = #42BDD8
|
|
|
|
[filament:Creality ABS @CREALITY]
|
|
inherits = *ABS*
|
|
renamed_from = "Creality ABS @ENDER3"
|
|
filament_vendor = Creality
|
|
temperature = 240
|
|
bed_temperature = 90
|
|
first_layer_temperature = 240
|
|
first_layer_bed_temperature = 90
|
|
filament_colour = #42BDD8
|
|
|
|
[filament:Prusament PLA @CREALITY]
|
|
inherits = *PLA*
|
|
renamed_from = "Prusament PLA @ENDER3"
|
|
filament_vendor = Prusa Polymers
|
|
temperature = 210
|
|
bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 24.99
|
|
filament_density = 1.24
|
|
filament_colour = #F94D0C
|
|
|
|
[filament:Prusament PETG @CREALITY]
|
|
inherits = *PET*
|
|
renamed_from = "Prusament PETG @ENDER3"
|
|
filament_vendor = Prusa Polymers
|
|
temperature = 245
|
|
bed_temperature = 70
|
|
first_layer_temperature = 245
|
|
first_layer_bed_temperature = 70
|
|
filament_cost = 24.99
|
|
filament_density = 1.27
|
|
filament_colour = #F94D0C
|
|
|
|
[filament:AzureFilm PLA @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = AzureFilm
|
|
temperature = 210
|
|
bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 19.97
|
|
filament_density = 1.24
|
|
filament_colour = #006AA6
|
|
|
|
[filament:Devil Design PLA @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = Devil Design
|
|
temperature = 215
|
|
bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 19.00
|
|
filament_density = 1.24
|
|
filament_colour = #FF0000
|
|
filament_spool_weight = 256
|
|
|
|
[filament:Devil Design PLA Matt @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = Devil Design
|
|
temperature = 205
|
|
bed_temperature = 60
|
|
first_layer_temperature = 205
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 20.00
|
|
filament_density = 1.38
|
|
filament_colour = #FF0000
|
|
filament_spool_weight = 256
|
|
|
|
[filament:Devil Design PLA Galaxy @CREALITY]
|
|
inherits = *PLA*
|
|
renamed_from = "Devil Design PLA (Galaxy) @CREALITY"
|
|
filament_vendor = Devil Design
|
|
temperature = 225
|
|
bed_temperature = 65
|
|
first_layer_temperature = 225
|
|
first_layer_bed_temperature = 65
|
|
filament_cost = 19.00
|
|
filament_density = 1.24
|
|
filament_colour = #FF0000
|
|
filament_spool_weight = 256
|
|
|
|
[filament:Extrudr PLA NX2 @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = Extrudr
|
|
temperature = 200
|
|
bed_temperature = 60
|
|
first_layer_temperature = 205
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 23.63
|
|
filament_density = 1.3
|
|
filament_colour = #3C4547
|
|
filament_spool_weight = 256
|
|
|
|
[filament:Extrudr GreenTEC Pro @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = Extrudr
|
|
temperature = 210
|
|
bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 56.24
|
|
filament_density = 1.35
|
|
filament_colour = #3C4547
|
|
|
|
[filament:Real Filament PLA @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = Real Filament
|
|
temperature = 195
|
|
bed_temperature = 60
|
|
first_layer_temperature = 200
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 24.99
|
|
filament_density = 1.24
|
|
filament_colour = #007ABF
|
|
|
|
[filament:Velleman PLA @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = Velleman
|
|
temperature = 200
|
|
bed_temperature = 60
|
|
first_layer_temperature = 205
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 27.99
|
|
filament_density = 1.24
|
|
filament_colour = #7EA60D
|
|
|
|
[filament:3DJAKE ecoPLA @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = 3DJAKE
|
|
temperature = 200
|
|
bed_temperature = 60
|
|
first_layer_temperature = 205
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 21.99
|
|
filament_density = 1.24
|
|
filament_colour = #125467
|
|
filament_spool_weight = 238
|
|
|
|
[filament:3DJAKE ecoPLA Matt @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = 3DJAKE
|
|
temperature = 195
|
|
bed_temperature = 60
|
|
first_layer_temperature = 195
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 24.99
|
|
filament_density = 1.38
|
|
filament_colour = #125467
|
|
filament_spool_weight = 238
|
|
|
|
[filament:3DJAKE ecoPLA Tough @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = 3DJAKE
|
|
temperature = 215
|
|
bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 29.99
|
|
filament_density = 1.21
|
|
filament_colour = #125467
|
|
|
|
[filament:FormFutura Tough PLA @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = FormFutura
|
|
temperature = 215
|
|
bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 46.65
|
|
filament_density = 1.21
|
|
filament_colour = #ed000e
|
|
|
|
[filament:123-3D Jupiter PLA @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = 123-3D
|
|
temperature = 200
|
|
bed_temperature = 60
|
|
first_layer_temperature = 205
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 19.50
|
|
filament_density = 1.24
|
|
filament_colour = #FFE200
|
|
|
|
[filament:Das Filament PLA @CREALITY]
|
|
inherits = *PLA*
|
|
filament_vendor = Das Filament
|
|
temperature = 210
|
|
bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
first_layer_bed_temperature = 60
|
|
filament_cost = 20.56
|
|
filament_density = 1.24
|
|
filament_colour = #C7F935
|
|
|
|
[filament:Das Filament PETG @CREALITY]
|
|
inherits = *PET*
|
|
filament_vendor = Das Filament
|
|
temperature = 240
|
|
bed_temperature = 70
|
|
first_layer_temperature = 240
|
|
first_layer_bed_temperature = 70
|
|
filament_cost = 27.44
|
|
filament_density = 1.29
|
|
filament_colour = #C7F935
|
|
|
|
# Common printer preset
|
|
[printer:*common*]
|
|
printer_technology = FFF
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;{layer_z}\n\n
|
|
between_objects_gcode =
|
|
pause_print_gcode =
|
|
deretract_speed = 40
|
|
extruder_colour = #FCE94F
|
|
extruder_offset = 0x0
|
|
gcode_flavor = marlin
|
|
silent_mode = 0
|
|
remaining_times = 0
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 500
|
|
machine_max_acceleration_retracting = 1000
|
|
machine_max_acceleration_x = 500
|
|
machine_max_acceleration_y = 500
|
|
machine_max_acceleration_z = 100
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 10
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 8
|
|
machine_max_jerk_y = 8
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
|
|
max_layer_height = 0.28
|
|
min_layer_height = 0.08
|
|
max_print_height = 250
|
|
nozzle_diameter = 0.4
|
|
printer_notes =
|
|
printer_settings_id =
|
|
printer_variant = 0.4
|
|
retract_before_travel = 2
|
|
retract_before_wipe = 70%
|
|
retract_layer_change = 1
|
|
retract_length = 5
|
|
retract_length_toolchange = 1
|
|
retract_lift = 0
|
|
retract_lift_above = 0
|
|
retract_lift_below = 0
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 60
|
|
single_extruder_multi_material = 0
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 1
|
|
z_offset = 0
|
|
printer_model =
|
|
default_print_profile = 0.16mm OPTIMAL @CREALITY
|
|
default_filament_profile = Generic PLA @CREALITY
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
|
|
|
|
# Intended for printers equipped with a strain gauge mechanism, like the CR-6 series
|
|
[printer:*straingauge*]
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM109 S{first_layer_temperature[0]-50} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
|
|
|
# Intended for printers with a smaller bed, like the Ender-3 series
|
|
[printer:*fastabl*]
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
|
|
|
# Intended for printers with a larger bed, like the CR-10 series
|
|
[printer:*slowabl*]
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
|
|
|
|
# Intended for printers with vendor official firmware verified to support M25
|
|
[printer:*pauseprint*]
|
|
pause_print_gcode = M25 ; pause print
|
|
|
|
# Intended for printers where the Z-axis lowers the print bed during printing, like the Ender-5 series
|
|
[printer:*descendingz*]
|
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
|
|
|
|
[printer:*spriteextruder*]
|
|
retract_length = 0.8
|
|
retract_speed = 30
|
|
deretract_speed = 30
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
|
|
# Intended for printers with dual extruders and a single hotend/nozzle, like the CR-X series
|
|
[printer:*dualextruder*]
|
|
single_extruder_multi_material = 1
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
extra_loading_move = -2
|
|
parking_pos_retraction = 92
|
|
deretract_speed = 40,40
|
|
extruder_colour = #FCE94F;#729FCF
|
|
extruder_offset = 0x0,0x0
|
|
max_layer_height = 0.28,0.28
|
|
min_layer_height = 0.08,0.08
|
|
nozzle_diameter = 0.4,0.4
|
|
retract_before_travel = 2,2
|
|
retract_before_wipe = 70%,70%
|
|
retract_layer_change = 1,1
|
|
retract_length = 5,5
|
|
retract_length_toolchange = 1,1
|
|
retract_lift = 0,0
|
|
retract_lift_above = 0,0
|
|
retract_lift_below = 0,0
|
|
retract_restart_extra = 0,0
|
|
retract_restart_extra_toolchange = 0,0
|
|
retract_speed = 60,60
|
|
wipe = 1,1
|
|
|
|
[printer:Creality Ender-3]
|
|
inherits = *common*
|
|
renamed_from = "Creality ENDER-3"
|
|
bed_shape = 3x3,228x3,228x228,3x228
|
|
max_print_height = 250
|
|
printer_model = ENDER3
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality Ender-3 BLTouch]
|
|
inherits = Creality Ender-3; *fastabl*
|
|
renamed_from = "Creality ENDER-3 BLTouch"
|
|
printer_model = ENDER3BLTOUCH
|
|
|
|
[printer:Creality Ender-3 V2]
|
|
inherits = *common*
|
|
renamed_from = "Creality Ender-3V2"
|
|
bed_shape = 5x0,215x0,215x220,5x220
|
|
max_print_height = 250
|
|
printer_model = ENDER3V2
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3V2\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality Ender-3 S1]
|
|
inherits = *common*; *spriteextruder*
|
|
bed_shape = 5x0,215x0,215x220,5x220
|
|
max_print_height = 270
|
|
printer_model = ENDER3S1
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1
|
|
|
|
[printer:Creality Ender-3 Max]
|
|
inherits = *common*
|
|
retract_length = 6
|
|
bed_shape = 5x5,295x5,295x295,5x295
|
|
max_print_height = 340
|
|
printer_model = ENDER3MAX
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3MAX\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality Ender-4]
|
|
inherits = *common*; *descendingz*
|
|
bed_shape = 5x0,215x0,215x220,5x220
|
|
max_print_height = 300
|
|
printer_model = ENDER4
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER4\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality Ender-5]
|
|
inherits = *common*; *descendingz*
|
|
retract_length = 6
|
|
bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
|
|
max_print_height = 300
|
|
printer_model = ENDER5
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5\nPRINTER_HAS_BOWDEN
|
|
machine_max_acceleration_e = 1000
|
|
machine_max_feedrate_z = 5
|
|
|
|
[printer:Creality Ender-5 Plus]
|
|
inherits = *common*; *slowabl*; *descendingz*
|
|
retract_length = 6
|
|
bed_shape = 5x5,355x5,355x355,5x355
|
|
max_print_height = 400
|
|
printer_model = ENDER5PLUS
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PLUS\nPRINTER_HAS_BOWDEN
|
|
machine_max_acceleration_e = 1000
|
|
machine_max_feedrate_z = 5
|
|
machine_max_feedrate_x = 300
|
|
machine_max_feedrate_y = 300
|
|
|
|
[printer:Creality Ender-6]
|
|
inherits = *common*; *descendingz*
|
|
bed_shape = 5x5,255x5,255x255,5x255
|
|
max_print_height = 400
|
|
printer_model = ENDER6
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER6\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality Ender-7]
|
|
inherits = *common*; *descendingz*
|
|
bed_shape = 5x5,245x5,245x245,5x245
|
|
max_print_height = 300
|
|
printer_model = ENDER7
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER7\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality Ender-2]
|
|
inherits = *common*
|
|
renamed_from = "Creality ENDER-2"
|
|
bed_shape = 0x0,150x0,150x150,0x150
|
|
max_print_height = 200
|
|
printer_model = ENDER2
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER2\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality Ender-2 Pro]
|
|
inherits = *common*
|
|
renamed_from = "Creality ENDER-2 Pro"
|
|
bed_shape = 2.5x2.5,160x2.5,160x160,2.5x160
|
|
max_print_height = 180
|
|
printer_model = ENDER2PRO
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER2PRO\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-5 Pro]
|
|
inherits = *common*; *slowabl*; *descendingz*
|
|
retract_length = 6
|
|
bed_shape = 5x5,295x5,295x220,5x220
|
|
max_print_height = 380
|
|
printer_model = CR5PRO
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR5PRO\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-5 Pro H]
|
|
inherits = *common*; *slowabl*; *descendingz*
|
|
retract_length = 3
|
|
bed_shape = 5x5,295x5,295x220,5x220
|
|
max_print_height = 380
|
|
printer_model = CR5PROH
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR5PROH\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-6 SE]
|
|
inherits = *common*; *straingauge*; *pauseprint*
|
|
bed_shape = 5x0,230x0,230x235,5x235
|
|
printer_model = CR6SE
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6SE\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-6 Max]
|
|
inherits = *common*; *straingauge*
|
|
retract_length = 6
|
|
bed_shape = 5x5,395x5,395x395,5x395
|
|
max_print_height = 400
|
|
printer_model = CR6MAX
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6MAX\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10 SMART]
|
|
inherits = *common*; *straingauge*
|
|
retract_length = 6
|
|
bed_shape = 5x5,295x5,295x295,5x295
|
|
max_print_height = 400
|
|
printer_model = CR10SMART
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SMART\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10 Mini]
|
|
inherits = *common*
|
|
retract_length = 6
|
|
bed_shape = 2.5x5,302.5x5,302.5x225,2.5x225
|
|
max_print_height = 300
|
|
printer_model = CR10MINI
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10MINI\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10 Max]
|
|
inherits = *common*; *slowabl*
|
|
retract_length = 6
|
|
bed_shape = 5x5,445x5,445x445,5x445
|
|
max_print_height = 470
|
|
printer_model = CR10MAX
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10MAX\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10]
|
|
inherits = *common*
|
|
retract_length = 6
|
|
bed_shape = 5x5,305x5,305x305,5x305
|
|
max_print_height = 400
|
|
printer_model = CR10
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10 V2]
|
|
inherits = *common*
|
|
retract_length = 6
|
|
bed_shape = 5x5,305x5,305x305,5x305
|
|
max_print_height = 400
|
|
printer_model = CR10V2
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V2\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10 V3]
|
|
inherits = *common*
|
|
retract_length = 1
|
|
bed_shape = 5x5,305x5,305x305,5x305
|
|
max_print_height = 400
|
|
printer_model = CR10V3
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V3
|
|
|
|
[printer:Creality CR-10 S]
|
|
inherits = *common*
|
|
retract_length = 6
|
|
bed_shape = 5x5,305x5,305x305,5x305
|
|
max_print_height = 400
|
|
printer_model = CR10S
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10 S Pro]
|
|
inherits = *common*; *slowabl*
|
|
retract_length = 6
|
|
bed_shape = 5x5,295x5,295x295,5x295
|
|
max_print_height = 400
|
|
printer_model = CR10SPRO
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPRO\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10 S Pro V2]
|
|
inherits = *common*; *slowabl*
|
|
retract_length = 6
|
|
bed_shape = 5x5,305x5,305x305,5x305
|
|
max_print_height = 400
|
|
printer_model = CR10SPROV2
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPROV2\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10 S4]
|
|
inherits = *common*
|
|
retract_length = 6
|
|
bed_shape = 5x5,395x5,395x395,5x395
|
|
max_print_height = 400
|
|
printer_model = CR10S4
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S4\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-10 S5]
|
|
inherits = *common*
|
|
retract_length = 6
|
|
bed_shape = 5x5,505x5,505x505,5x505
|
|
max_print_height = 500
|
|
printer_model = CR10S5
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S5\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-20]
|
|
inherits = *common*
|
|
printer_model = CR20
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-20 Pro]
|
|
inherits = *common*; *fastabl*
|
|
retract_length = 4
|
|
printer_model = CR20PRO
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20PRO\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-200B]
|
|
inherits = *common*; *descendingz*
|
|
bed_shape = 5x5,195x5,195x195,5x195
|
|
max_print_height = 200
|
|
printer_model = CR200B
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR200B\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality CR-8]
|
|
inherits = *common*
|
|
bed_shape = 5x5,215x5,215x215,5x215
|
|
max_print_height = 210
|
|
printer_model = CR8
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR8\nPRINTER_HAS_BOWDEN
|
|
|
|
#[printer:Creality CR-X]
|
|
#inherits = *common*; *dualextruder*
|
|
#retract_length = 6,6
|
|
#bed_shape = 5x5,295x5,295x295,5x295
|
|
#max_print_height = 400
|
|
#printer_model = CRX
|
|
#printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CRX\nPRINTER_HAS_BOWDEN
|
|
|
|
#[printer:Creality CR-X Pro]
|
|
#inherits = *common*; *dualextruder*; *slowabl*
|
|
#retract_length = 6,6
|
|
#bed_shape = 5x5,295x5,295x295,5x295
|
|
#max_print_height = 400
|
|
#printer_model = CRXPRO
|
|
#printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CRXPRO\nPRINTER_HAS_BOWDEN
|
|
|
|
[printer:Creality Sermoon-D1]
|
|
inherits = *common*; *descendingz*
|
|
retract_length = 1
|
|
bed_shape = 5x5,275x5,275x255,5x255
|
|
max_print_height = 310
|
|
printer_model = SERMOOND1
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_SERMOOND1\nPRINTER_HAS_BOWDEN
|